|
|
||||||||||||||||
 |
||||
 |
||||
|
How do we do this?
Cost of replacement parts
Engineering Design
Printing Registration Accuracy
Simple to Operate
Safety Features
Printing Speed (Garments printed per hour)
Our pledge to you.
TAS screen printing machines are recognised worldwide as extremely reliable machines, simple to operate and with very low running and maintenance costs. This is not just an accident, it is our philosophy and our intention at all times to keep these costs as low as possible.
How do we do this?
Firstly, all components used have a test period where they are put under actual test conditions for a period
of 4 million operations, and then assessed for wear and tear. Only then will we decide if they meet our exacting standards.
Cost of replacement parts
Of all the parts used in a TAS machine 85% can be purchased locally,
anywhere in the world.
Engineering Design
Our machines have built an unparalleled reputation for reliability over many years of production.
Printing Registration Accuracy
Registration with a TAS machine is as accurate as half the thickness of a single strand of hair and will remain so for the life time of use. (30 years or more) This can only be achieved with a rigid machine base and rotor /stator assemble. TAS only use:
solid ground and hardened Aluminium pallets that will last a life time under normal use.
Simple to Operate
How easily an operator can understand and use our machine is of vital importance to us at TAS and this is forms the basis of how we designed and produced our Touch Panel Control (TPC)
The TPC on a TAS is the control centre and while we use state of the art electronics to manage the functions of the machine, we have managed to maintain it's simplicity by it's clever design.
Safety Features
Safety of the operator using our machine is of paramount importance, so along with the use of safety cables around the machine which, when disengaged will stop the machine, we also use a laser beam across the load and unload area for additional safety of the operator.
Printing Speed (Garments printed per hour)
There has been much said about how fast a machine can print but the facts remain that on average a person loading a complete Tee Shirt will average around 450-500 garments per hour. TAS machines will index at speeds of up to 900 cycles per hour, far exceeding this number.
Secondly, the parts tested and finally used in the manufacture of our machines
are always checked to see if they are readily available world wide so that you,
the end user, can obtain them locally to where you are , quickly and without too much down time.
You can purchase your spare parts direct from TAS at any time via our
web site by clicking here.
At TAS, we use standard,off the shelf components where possible to save you, the end user, time and money.
It is our promise to you that TAS will at all times keep the cost
of our spare parts down to an absolute minimum.
We are always looking at new products to improve on the components we use but the criteria for acceptance of any new items is tough and if they are to be used they must:
a) Improve the performance of the component they are replacing
b) Be a stronger design and last longer.
c) Be cost effective.
All components that are a part of the stator and rotor assembly are wash ground before being powder coated to make certain everything is completely flat and accurate.
This commitment to strong engineering principles has given TAS the reputation of being the very best you can buy in screen printing machines.